If you make the same changes in FlexColor while the sensor unit is not connected it will
have no eect.
Error messages
When working with the H1D untethered the following error messages in the rear display
ensure complete control of image quality.
Each message is accompanied by a low key error sound:
‘Image transfer error’
An error has occurred between the camera and Image Bank.
Please check the link cable and connectors for proper functionality.
‘Camera body error’
An error has occurred between camera and Ixpress camera back.
Please check exposure cables, connectors, and batteries.
‘Time out exposure error’
e camera back receives a time out signal while waiting for the
exposure to nish.
Please check that the exposure time is set correctly.
‘Camera not compatible (H1D only!)’
e H1D sensor unit will only function with an H1D camera
To Next Page
Loading...
