Hasselblad H1D
4.2 Imprint
The Imprint facility controls the text that will appear along the edge of each frame. It is pos-
sible to imprint approximately 40 characters at one time.
From 4.2 Imprint, press Enter to access:
• 4.2.1 Imprint Type
• 4.2.2 Text
4.2.1 Imprint Type
In Imprint Type you can decide which technical information shall be recorded.
From 4.2.1 Imprint Type press Enter. By moving the front control wheel you can access six
options:
• Imp. Type 1 prints the relevant information: aperture, shutter, metering mode,
exposure mode, exposure compensation and ash compensation.
• Imp. Type 2 prints the relevant basic information only: aperture, shutter, and
exposure correction.
• Date & Time date & time only (the correct date and time is set through the Settings
menu under ‘Date & Time’.)
• Text & Date prints text plus date
• Text & Info prints text plus basic info
• Text prints text only (that you have created in 4.2.2 Text)
To Next Page
Loading...
Need help?
General
