Hasselblad H1D
Manual focus setting
When the le arrowhead alone appears it means the focus setting is too far beyond the chosen
distance (the area framed within the central zone in the viewnder) and when the right ar-
rowhead alone appears it means the focus setting is too close. Focus is correct when both ar-
rowheads appear together. If the focus cannot be established, then both arrowheads ash.
Automatic focus setting
Focus is correct when both arrowheads are visible together. Focus is incorrect if only one
arrowhead is visible. If the focus cannot be established, then both arrowheads ash.
Focus setting too far beyond the chosen distance
Focus setting too close for chosen distance
Focus setting correct for chosen distance
To Next Page
Loading...
