16
The basic principle behind making changes is that the appropriate button is first
pressed to access the menu and then settings altered by way of the control wheels.
The appropriate control wheel is designated by arrowheads alongside the setting
description.
Some buttons have a toggle function, the ON.OFF button has a quick
‘click’ action as well as a longer (half-second) ‘press’ action and the
shutter release has two positions: ‘half-press’ and ‘full-press’.
Several buttons on the grip are multifunctional, according to the state
of the menu. In the example illustrated here, the FLASH button func-
tions as the EXIT button, the AF button functions as the ON button
and the DRIVE button functions as the SAVE button.
At very low temperatures the LCDs require a few seconds to display
new settings.
‘Quick save’ - half-press shutter release button
Save - press save button (DRIVE button)
Escape - press ESC button (PROFILES /ESC button)
Exit - press exit button (FLASH button)
Remember the following groupings of ‘saved’ and ‘not-saved’ actions when making settings changes:
SAVED NOT SAVED
The following is a list of the various terms describing the various
actions that appear in the menu (on the grip LCD):
Enter : moves screen down one level on the menu.
Exit : moves screen back up one level on the menu. Does not save any
settings.
Off : deactivates the particular function being set.
On : activates the particular function being set.
Sel. : Select - selects the character marked when imprinting text and
profile name.
ESC : Escape - terminates an action and returns to the main screen. Does
not save any settings.
Save : saves a setting and also moves screen back up one level on the
menu. Can save many changes made in a setting sequence.
Examples
To Next Page
Loading...
Need help?
General
