Hatz 1B30 - 7.6 Check the oil level

Operation and use 1B20, 1B27, 1B30, 1B40, 1B50
48
HATZ
Operator's Manual
7.6.1 Engine oil level
Overview
1 Dipstick
2 Oil refilling container
Procedure
Step Activity
1 Switch off the engine and wait several minutes for the engine oil
to collect in the crankcase. Engine must be level.
2 Remove contamination on the engine in the area of the dipstick.
3 Unscrew the dipstick and clean it.
4 Reinsert the dipstick and screw it tight.
5 Unscrew the dipstick and check the oil level.
6 If the oil level is close to the min. mark, add engine oil to the
max. mark.
7 Reinsert the dipstick and screw it tight.