Hatz 1B30 - Filling the Oil Bath Air Filter (Option)

1B20, 1B27, 1B30, 1B40, 1B50 Transport, assembly and commissioning
HATZ
33Operator's Manual
Step Activity
3 Reinsert the dipstick and screw it tight.
4 Unscrew the dipstick and check the oil level.
5 If required, top up engine oil to the max. mark.
6 Reinsert the dipstick and screw it tight.
6.5 Filling the oil bath air filter (option)
Overview
1 Clamp fastener (2x opposing)
2 Oil container
3 Filter insert
4 Gasket
5 Level mark
Procedure
Step Activity
1 Release the clamp fasteners (1).
2 Remove the oil container (2).
3 Take the filter insert (3) out of the oil container.
4 Fill the oil container with engine oil up to the level mark (5).
2 Insert the long end of the filter insert (3) into the oil container.
3 Mount the oil container, ensuring that the gasket (4) is properly
positioned and the locks (1) are correctly fastened.