1.181.18
OPERATING THE MOWER
MOWING WITH GRASS COLLECTION
WARNING: PREVENT ACCIDENTS - ALWAYS check the condition of the grassbag
for signs of damage. Replace a damaged grassbag immediately. DO NOT operate the
mower with a damaged grassbag. ALWAYS stop the engine and disconnect the spark
plug lead before attempting to remove a grass blockage.
The grassbag is designed to collect grass clippings.
To achieve best grass collection performance, mow in dry operating
conditions.
Recognise that when the grassbag is full the airflow stops and the
grassbag deflates.
Grassbag attachment: Raise the rear deflector and lower the grass-
bag through the handlebar apperture to connect onto the upper
mounting points. Lower the grassbag to rest against the rear of the
mower. Finally lower the rear deflector to rest against the top of the
grassbag.
Grassbag removal: Raise the rear deflector and lift the grassbag
through the handlebar apperture and away from the mower. Finally
lower the rear deflector to rest against the rear of the mower.
Grassbag emptying: To empty the grassbag, pour out the grass
clippings and shake the grassbag vigorously to clean the airways.
Good grass collection depends on good air flow through the grass-
bag. When collecting grass clippings it is important that the grassbag
is emptied regularly to prevent blockages and engine overloading.
To Next Page
Loading...
Need help?
General
