1.171.17
Forward travel:
Push model - Hold and push against the handlebar with both
hands to move the mower forwards.
Auto drive models - Hold the handlebar and operate the clutch
lever to achieve forward travel.
Release the clutch lever to stop forward travel. When the clutch
lever is disengaged the mower can be operated as a push model.
This feature is useful when mowing in confined areas.
Reverse travel:
Push models - Hold and pull against the handlebar with both
hands to reverse the mower towards you.
Auto drive model - Disengage the clutch lever. Hold and pull
against the handlebar with both hands to reverse the mower
towards you.
OPERATING THE MOWER
WARNING: PREVENT ACCIDENTS - Always reverse the
mower carefully towards you. Always switch off the engine
before walking backwards with the mower.
SPEED CHANGE (Code 399S only)
Travel Speed can be altered by selecting one of the four positions.
IMPORTANT: ONLY operate the speed control when the
engine is running to avoid damage to the mechanism.
TRAVEL
TURNING THE MOWER
To make a wide turn : Steer the mower with the handlebar whilst
travelling forward.
To make a tight turn : Stop forward travel. Apply downward
pressure on the handlebar to raise the front wheels of the mower
just above ground level and steer the mower using the handlebar
in the required direction.
WARNING: PREVENT ACCIDENTS - DO NOT raise the front of the mower excessive-
ly when making a turn. NEVER raise the rear of the mower when the engine is running.
To Next Page
Loading...
Need help?
General
