To Next PageTo Next Page
Need help?Do you have a question about the HBC eco and is the answer not in the manual?
Explains safety and informational symbols used throughout the manual.
Essential safety rules for proper and safe operation of the radio control system.
Specific safety guidelines for the operator during crane or machine operation.
Step-by-step guide on how to turn the transmitter on and off.
Explains the automatic power-off feature for safety and battery saving.
Details fixed, manual, and automatic frequency selection options.
Information on transmitter batteries and their charging procedures.
Specifications and care for the BA2250_0 transmitter battery.
Instructions for using the AC charger for the BA2250_0 battery.
Instructions for using the DC charger for the BA2250_0 battery.
Introduces various optional features and their functions.
Explains the dual function of specific buttons as a shift key.
Details how to operate the transmitter via a cable connection.
Describes the infrared module for enhanced safety and activation.
How to alternately control a crane with multiple transmitters.
Controls multiple cranes alternately with multiple transmitters.
Explains T1 and T2 modes for controlling multiple cranes.
Master/Slave tandem operation for controlling cranes.
Provides a table of problems, causes, and remedies for transmitter issues.
Procedures for dealing with defective transmitters and receivers.
Lists key technical details like frequency, power, and housing.
Provides detailed measurements and physical specifications of the transmitter.
Official declarations regarding compliance with EC directives and standards.
General| Brand | HBC |
|---|---|
| Model | eco |
| Category | Transmitter |
| Language | English |
