Operating Instructions
Radio Transmitter eco
Page 4 / 24 AOEM1G30 [PMTS/DOKUS]
HBC-radiomatic GmbH • 74564 Crailsheim • Germany
2007-06-18 Information and specifications subject to change without notice.
Radio Control System
1 Safety Instructions
1.1 Pictographs
The following pictographs will be used throughout the present operating instructions:
Indicates a possible shock hazard
Contacting components under voltage may lead to death. Housing marked with this
symbol may only be opened by qualified electricians after having disconnected the
device from the mains supply (supply voltage, operating voltage or input terminal
voltage).
Indicates safety relevant passages
You will find this pictograph as an indicator for occupational safety measures. The
neglecting of such measures poses a serious hazard.
Always observe the instructions and be particularly attentive and careful.
Avoid any situations that could at any time be a danger to persons or machines.
Indicates important information
This symbol brings your attention to important information on how to secure a long
serviceable life of the radio control system.
Pay attention to the comments and instructions given. Ignoring the information provided
may permanently impair the reliability and operability of the equipment.
To Next Page
