Scope of supply, accessories and equipment variants
C9C A03729_03_YI0_01 HBM: public 9
2 Scope of supply, accessories and equipment
variants
Scope of supply
S C9C force transducer
S C9C mounting instructions
S Test report
Accessories
Description Ordering
number
KAB168-5, PUR connection cable with M12 8-pin socket, 5 m
long, free ends on opposite side. For connecting the amplifier
module to the downstream electronics
1-KAB168-5
KAB168-20, PUR connection cable with M12 8-pin socket, 20 m
long, free ends on opposite side. For connecting the amplifier
module to the downstream electronics
1-KAB168-20
Thrust piece EDO9/20kN; suitable for nominal (rated) forces from
0.5 kN … 20 kN
1-EDO9/20kN
Thrust piece EDO9/50kN; suitable for nominal (rated) force 50 kN 1-EDO9/50kN
Equipment variants
All force transducers are available in different versions. The following options
are available:
1. Cable
The C9C is equipped with a cable 1.5 m long in the standard version. You
can also order the force transducer with the following cable lengths:
-3 m
-5 m
-6 m
-7 m
- 12 m
To Next Page
Loading...
Need help?
General
