General application instructions
C9C A03729_03_YI0_01 HBM: public 11
3 General application instructions
Force transducers are suitable for measuring compressive forces. They
provide highly accurate static and dynamic force measurements and must
therefore be handled very carefully. Particular care must be taken during
transportation and installation. Dropping and knocking the transducer may
cause permanent damage.
C9C series force transducers have a convex force application part, to which
the forces to be measured must be applied.
The Specifications section 9 on page 29 lists the permissible limits for
mechanical, thermal and electrical loading It is essential to observe these limits
when planning the measuring set-up, during installation and, ultimately, during
operation.
To Next Page
Loading...
Need help?
General
