Operation
K148 A01681_03_X00_04 HBM: public 23
Example:
Command:
K1A 0,1, 2, 0
+10% of 5 mV/V (= 0.5 mV/V)
Single-channel mode, 15-pin connector
Response: 0 CRLF (command understood)
Command:
K1B 1, 100, 50
Ready LED ON,
Tone on for 100 ms, 50 ms interval
Response: 1 CRLF (1 tone working)
Reading out the device-specific parameters:
Command Description Response
SNR? Serial number ”K148-xxxx”
SNR?0
SNR?1 USB address ”USBHBM 1xxx”
SNR?2 Firmware version ”Px.x”
To Next Page
Loading...
