Symbols used
K148 A01681_03_X00_04 HBM: public 7
2 Symbols used
2.1 Symbols on the device
Symbol Meaning
Statutory waste disposal mark
In accordance with national and local environmental
protection and material recovery and recycling regulations, old
modules that can no longer be used must be disposed of
separately and not with normal household garbage.
Statutory mark of compliance with emission limits in electronic
equipment supplied to China
CE mark
The CE mark is used by the manufacturer to declare that the
product complies with the requirements of the relevant EC
directives (the Declaration of Conformity can be found at
www.hbm.com
2.2 Symbols used in this manual
Important instructions for your safety are specifically identified. It is essential to
follow these instructions in order to prevent accidents and damage to property.
Symbol Meaning
Notice
This marking draws your attention to a situation in
which failure to comply with safety requirements can
lead to damage to property.
Important
Important information
This draws your attention to important information
about the product or about handling the product.
To Next Page
Loading...
