22
PME-MP30DP
HBM A0737-4.0 de/en/fr
1 Introduction
This Operating Manual describes only those functions which differ from the
MP30. The features of the MP30DP correspond to those of the MP30.
The MP30DP carrier-frequency amplifier has been expanded to include a
Profibus interface. The features on the CAN-interface remain the same; the
object directory is expanded to include some parameters for the Profibus
connection.
The Profibus connection is made using a 9-pin sub-D connector (conforming
to standard) on the front panel next to the transducer port.
DP protocol is used on the Profibus.
The following can be downloaded:
− the measured values (gross, net, peak values)
− the status of the limit switches
− control bits for taring, zeroing, peak value store control and changing the
parameter set, and autocalibration
− the limit values
To Next Page
Loading...
