QuantumX
14 A2361-3.3_en/de
4 Connection options
The following chapters explain how to connect the
modules and which settings you must implement:
S Chapter 4.1 Connection to PC via Ethernet
S Chapter 4.2 Connection to PC via FireWire
Connection via EtherCAT
1)2
to an automation system is
described in the CX27 documentation.
Note
If you are already using QuantumX modules and want to
add new modules, please install the latest QuantumX
software and the latest module firmware (see
Chapter 4.3). The latest PC software and the module
firmware can be found on the HBM website
(http://www.hbm.com/quantumx) in the area of
Software/Firmware downloads.
2)
EtherCAT
®
is a registered trademark and patented technology, licensed by Beckhoff
Automation GmbH, Germany
To Next Page
Loading...
