Need help?Do you have a question about the HBM QuantumX CX22B and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Resolution | 24 bit |
| Input voltage range | ±10 V |
| TEDS support | Yes |
| Interfaces | Ethernet |
| Power supply | 10-30 V DC |
| Protection class | IP40 |
| Measurement range | ±10 V |
| Input channels | 2 |
| Accuracy | 0.01 % |
| Bridge resistance | 120 Ω |
Details the DC voltage requirements and connection for the data recorder and modules.
Explains how to connect QuantumX modules using FireWire or Ethernet.
Outlines different methods for interacting with the data recorder, including direct and remote connections.
Describes the simplest method of operating the recorder using direct peripheral connections.
Explains how to connect and operate the data recorder remotely using a personal computer.
Provides instructions for establishing a remote desktop connection for device control.
Offers troubleshooting steps for common connection issues encountered with the recorder.
Guides users through the process of setting up a new Data Acquisition (DAQ) job in catman® EASY.
Provides steps for restoring the system to its original delivery condition in case of issues.
Lists common errors and their corresponding solutions or troubleshooting steps.
To Next Page
