HBM QuantumX CX22B - Operating as Gateway

Operating the CX22B/CX22B-W as gateway
CX22B / CX22B-W A3169-8.0 HBM: public 71
11 Operating the CX22B/CX22B-W as gateway
11.1 Description
The gateway mode allows to route QuantumX modules
that are connected via firewire to other network adapters
of the CX22B-W (e.g. ethernet or WLAN). In this mode,
the data recorder acts like any other gateway module
such as the CX27B, however, with higher data through
put.
Important
When the CX22B-W is in gateway mode, it cannot be
used as a recorder. This means that catman shall not run
on the recorder while the CX22B-W is configured in gate
way mode.
11.2 Activate/deactivate gateway mode
To activate/deactivate the gateway mode, go in the Shell
settings of the CX22B-W into the "General" tab. Check
the option "Activate gateway functionality" to activate the
option and uncheck it to deactivate it.