Operating the Data Recorder
CX22B / CX22B-W A3169-8.0 HBM: public 33
In Windows 7, for example, the remote desktop connec
tion program is found under:
All programs −> Accessories.
6.2.1 A direct Ethernet line between PC and Data
Recorder
► Connect your PC and CX22B‒W via an Ethernet ca
ble, category CAT5e or higher.
► Install the HBM Device Manager program, which can
be found on the HBM support sites or in the software
package QuantumX / SomatXR system software.
► Launch the HBM Device Manager program on the PC:
Windows Start menu−> All programs−> HBM −>
HBM Device Manager.
► Click on Find devices.
► Select the Data Recorder from the list, the current
address(es) of the interface (WLAN only with
CX22B‒W) are also displayed. The module in Fig. 6.1
has the IP address 172.19.204.252.