The first DAQ job with catman
EASY
58 A3169-8.0 HBM: public CX22B / CX22B-W
sensors, as required. A description of this can be found
in the catman
EASY online help for the sensor data
base.
8.2 Transferring data/files to the PC
There are several ways for you to transfer the measure
ment data acquired by the CX22B‒W Data Recorder to
your PC:
1. Directly from CFast:
a.) CX22B switched off
Switch off the module, remove the CFast and plug the
card into your PC. Then copy the data from the card.
b.) CX22B during operation
Go to the Data Recorders start screen, push “Eject
memory card” and pull out the CFast card.
2. Via a USB flash drive, e.g. a USB memory stick:
Plug the USB flash drive into one of the CX22B‒W's
USB interfaces and connect the keyboard and moni
tor. In the start screen, click on Exit to Windows and
use the operating system (Windows Explorer) to copy
the files.
3. Data exchange via the clipboard:
Configure your remote desktop connection so that you
can exchange data via the clipboard, see Section on
Page.
4. Data exchange via a PC drive integrated into the
CX22B‒W as an external drive:
Configure your remote desktop connection so that
one or more of your PC's drives are integrated as
additional CX22B‒W drives, see Section 6.3.
To Next Page
Loading...
