Mechanical installation
38 A3452-10.0 T40B
Important
You must not change the position of the sensor head.
Important
This is a magnetic rotational speed measuring system.
In applications where magnetic strengths are expected to
be high (such as an eddycurrent brake), suitable action
must be taken to ensure that the max. magnetic field
strength stated in the specification is not exceeded.
Never loosen the screws!
Sensor head for
measuring rotational
speed
Fig. 5.11 Torque transducer with sensor head for rotational
speed measurement, Option 7, Code S and U
To Next Page
Loading...
