-------------------------------------------------------------------------------------GEN III OPERATIONS MANUAL
HealthCare Information, LLC
17
Pillow SPK1 Sets type of pillow speaker for single pillow speaker board. When using the standard single pillow
Mode this setting is for both the ¼” jack and the 6-pin jack. When using a dual pillow speaker board this
setting is for the ¼” jack only. Selections are:
ZENITH – RCA – PHILIPS – ZEN-5V – VISITOR ST – R5INTERACTV –
G4 INTERACTV – G4R5 STANDARD – 1 KEY – 3 KEY
ZENITH Digital pillow speakers sending Zenith control codes.
RCA Digital pillow speakers sending RCA control codes.
PHILIPS Digital pillow speakers sending Philips control codes.
ZEN-5V Older digital pillow speakers sending Zenith codes and operating from
5VDC.
VISITOR HCI Visitor Station
STATION
R3 INTERACTV R5 interactive pillow speaker.
G4 INTERACTV G4 interactive pillow speaker.
G4R5 STANDARD G4R5 standard pillow speaker.
1 Key One button analog pillow speaker.
3 Key Three button analog pillow speaker. Must use 6-pin pillow
speaker jack.
Pillow SPK2 Dual pillow speaker board only. Sets type of pillow speaker used with the 6-pin pillow speaker jack.
If a single pillow speaker board is installed the setting will indicate None and can not be changed.
Selections are the same as Pillow SPK1 Mode.
NOTE: Dual pillow speaker board option is not available for Android™ sets at the time of this
printing. Coming soon. Contact your dealer for details.
Time Sets clock and timer functions.
Sleep Timer Amount of time before the set turns off automatically. Selections are:
Off – 5 Min – 10-Min – 15 Min – 30 Min – 45 Min –
60 Min – 90 Min – 120 Min – 180 Min – 240 Min
Time Zone Sets local time zone. This must be set correctly for Auto Sync to function correctly.
Selections are:
Atlantic - Eastern – Central – Mountain – Pacific – Alaska – Hawaii
DST Daylight Savings Time. When on and Auto Sync is on clock is set forward 1 hour.
Time Format Sets how time and date is displayed. Selections are:
12-hour – 24 hour
Auto Sync When on set will automatically set the date and time when tuned to a digital channel. You must have
Time Zone and DST set correctly for the correct time to be set.
To Next Page
