-------------------------------------------------------------------------------------GEN III OPERATIONS MANUAL
HealthCare Information, LLC
23
An “X” in the ON/OFF column indicates the channel is turned on. An “X” in the EDU
column indicates the channel has been added to the EDU list.
5. When finished press the “SETUP” button to exit.
NOTE: Channels in the EDU list can be quickly accessed by pressing the EDU or FAV
button. A list of channels in the EDU list will be displayed. Use the Up/Down arrow buttons
to select the desired channel. The highlighted channel will be shown behind the menu. Press
the “ENTER” button to exit.
CH No. Shows current channel. Use the Left/Right arrow button to change channel without leaving the OSD
menu. Use this to change channels when entering channel labels.
Label Label that appears when a channel is tuned to.
1. Select the channel using the CH No. Line.
2. Press the right arrow button.
3. Use the left/right arrow button to select the character to edit. Use the up/down arrow
buttons to change the character.
4. When finished press the “SETUP” button.
NOTE: When a digital channel is select the broadcast channel label will show. Use the above
procedure to enter a custom label. Once a custom label is entered it will be used in place of the
broadcast label.
DTV Signal Shows signal level when tuned to a digital channel.
To Next Page
Loading...
