Disclaimer: 3
rd
party and/or custom firmware providing extra features are not covered in this manual.
Vertex² Out1/Up Button
The 4K Vertex² offers 2 functions per push button.
[OUT1] Wake up from sleep/fade mode and/or set and switch active or inactive inputs for TX1 output.
[UP] When you are in Vertex² OLED MENU, the UP button allows you to navigate upward.
Vertex² OLED/OSD will report info for up to two active inputs in default Matrix mode.
Note: You can also control and change settings with IR codes, through IP or RS232 for MAC/WIN/Linux
or from the embedded Webserver for MAC/WIN/Linux PC or via Android/iOS smartphone/tablet or any
web browser based device.
To Next Page
Loading...
