Disclaimer: 3
rd
party and/or custom firmware providing extra features are not covered in this manual.
Vertex² Info/Exit Button
The 4K Vertex² offers 2 functions per push button.
[INFO] Wake up from sleep/fade mode and/or Cycle OLED infopage: INFO > LAN INFO > HDR INFO > …
[EXIT] When you are in Vertex² OLED MENU, the EXIT button allows you to exit OLED MENU.
Note: You can also control and change settings with IR codes, through IP or RS232 for MAC/WIN/Linux
or from the embedded Webserver for MAC/WIN/Linux PC or via Android/iOS smartphone/tablet or any
web browser based device.
To Next Page
Loading...
