Disclaimer: 3
rd
party and/or custom firmware providing extra features are not covered in this manual.
Vertex² Overview
Team HDfury would like to thank you personally for purchasing the 4K Vertex²!
This unique HDMI2.0b device supports up to 4 inputs for true full 4K60 4:4:4 600MHz 18Gbps bandwidth
signals. It will allow you to solve any HDCP error, extract full HDMI audio from any HDMI sources and up
to Atmos HBR over TrueHD from eARC TVs to feed older AVR and Matrix any SD/HD/FHD/UHD/HDR/DV
or PC signals up to 600MHz. Upscale to 4K or downscale to 1080p any channel individually, display
relevant information on OLED/OSD, select between multiple edid banks for each inputs. Inject, replace
or translate HDR metadata and AVI infoframe. It is also capable of auto switching any sources including
X1X, ATV4K, Shield, etc… Based on incoming content type it can send relevant RS232 commands to any
RS232 controllable display. Control can be completed with IR codes, push buttons on the unit, via IP or
RS232 (MAC/WIN/Linux) or through embedded Webserver (for any web browser based device such as
MAC/WIN/Linux computer or Android/iOS phones, tablets and others).
Additionally, Vertex² offers a unique +5V management at output to solve standby issue of any sinks.
To Next Page
Loading...
