Disclaimer: 3
rd
party and/or custom firmware providing extra features are not covered in this manual.
Vertex² Menu/Toggle Button
The 4K Vertex² offers 2 functions per push button.
[MENU] Wake up from sleep/fade mode and/or Enter Vertex² OLED MENU.
[TOGG] When you are in Vertex² OLED MENU, the TOGGLE button allows you to change and cycle any
setting value.
Note: You can also control and change settings with IR codes, through IP Control or RS232 for
MAC/WIN/Linux or from the embedded Webserver for MAC/WIN/Linux PC or via Android/iOS
smartphone/tablet or any web browser based device.
To Next Page
Loading...
