Disclaimer: 3
rd
party and/or custom firmware providing extra features are not covered in this manual.
Vertex² Web Server EDID Section
[COPY TX0 SINK]: Use EDID from the device connected at TX0 output.
[COPY TX1 SINK]: Use EDID from the device connected at TX1 output.
[FIXED EDID]: Use a 4K60 4:2:0 8b 300MHz 2ch Audio EDID.
[CUSTOM]: Define individual EDID for each input from a list of 10 custom and 90 predefined EDID.
[AUTOMIX]: Use dynamic EDID created by a choice of 5 EDID Algo and 14 EDID Flags.
[DOWNLOAD ACTIVE EDID TABLES]: Download any EDID from any inputs or outputs.
[UPLOAD EDID TABLES]: Select an EDID file and a Custom EDID Table# click SEND EDID to upload it.
[REFRESH]: Refresh the current page.
To Next Page
Loading...
