6 Using the heating system – Heating up the system
56
21.Open the fuel chamber door (1).
22.Leave any unburnt pieces of wood and charcoal in the fuel
chamber (3).
M
ANUAL IGNITION 23.Stack some highly flammable material (small pieces of dry wood)
about 10 cm high on the burner nozzle (4) so that it is covered.
24.Lay some small pieces of cardboard on top of the wood inside the
fuel chamber (3).
25.Ignite the fuel.
26.Allow the fuel to generate a good fire.
Figure 6/10 - Open the fuel chamber door slowly
Figure 6/11 - Filling the fuel chamber
For kindling, we recommend log wood with a diameter of D5 (2–5
cm).
We recommend using bio-firelighters consisting of wood shavings
soaked in paraffin. In contrast to newsprint, these firelighters are
smokeless, odourless and free of pollutants.
Only put in as much wood as the heating system and accumulator
can absorb as energy.
To Next Page
Loading...