Please read all warnings on Headway Sheer Acoustic
EDB-2 H.E very carefully
1 SAFETY PRECAUTIONS & OPERATION
1.1 IMPORTANT SAFEGUARDS to your life and gear to
note before use of your EDB- 2 H.E
IMPORTANT: Make sure that you power only by: PP3
(9v) battery as included with this unit or: Phantom Power
via XLR-Stereo Jack plug Adapter (supplied as standard
with unit) installed in Output Socket and with 48v
Phantom from Mixer
Headway EDB/M PSU (Optional) Mains AC-DC 18v
Adapter Connector Types available for EDB-2 H.E See
Electronic Specifications
EDB/M PSU UK = United Kingdom/Eire/Singapore
EDB/M PSU EU = Europe (Continental Mainland)
EDB/M PSU NA = North America/S. America/Japan
EDB/M PSU AUS = Australasia/S. Africa
1.1.2 EARTH PROTECTION & GROUNDING To prevent
electric shock, ensure that any Input/Output cables from
EDB-2 H.E are connected to amplification or signal
processing devices (e.g. mixers, amplifiers & effects
units) so that where Mains powered devices with an
Earth Connection are used, there is a continuous,
unbroken chain of Mains earth connection and where the
mains supply at the venue offers a viable Earth or
Ground connection. DO NOT disconnect any
ground/earth wire on any earth connected mains
powered devices
1.1.3 MAINS PROTECTION Always take care to protect
your own life and those of others along with your
equipment by using RCD Circuit Breakers and AC Mains
P.12
To Next Page
Loading...