headway EDB-2 H.E - Uneven String Amplification

• Damp any strings, which will not be in use either
with techniques while playing or when left on stand
such as by wedging in plectrums (pics)
• Getting people, such as your audience into an
enclosed performance space will soak up a lot of
sound reflections and discourage feedback as if
MABS, or Mobile Acoustic Baffles!
• Check that a power amp output or headphone
output is not plugged into EDB-2 H.E inputs
20.2 UNEVEN STRING AMPLIFICATION, HARSH or
BOOMY SOUND?
• Use "Notch Filter" or EQ controls to hone in on and
cut troublesome frequencies
• Under saddle pickups may not be fitted or seated
correctly and evenly on the instrument. Contact a
professional luthier in order to have the installation
checked and put right
• If a contact pickup is in use, change its placement
in order to get the best sound by locating the
sweet spot and avoiding honks, resonances and
hollowness
• If a microphone is in use, change its position to
obtain the best balance and overall sound. Guitars
often Mic up best with Mic pointed towards treble
strings area of upper bout a little away from sound-
hole
P.63