Passive Pickups and some Dynamic and Electret
Condenser Microphones. Offers Stereo (TRS) Socket
configured for standard Mono Jack Plug Inputs.
Alternatively Stereo Jack Plugs may be used with
Phantom Power options. See: Sections 3.x,xi,xii, 8 and 9
Warning! - Plugging a live Power Amp would likely
damage the unit and negate the Guarantee / Warranty
5.0 MUTE/ LIVE SWITCHES ON CH.1 & CH.2 -
LOCATED ON TOP. Mute position with Red LED
illuminated indicates that Output is OFF on that Channel.
They are useful to allow silent tuning in front of audience
or to switch off during periods of inactivity without re-
setting controls, preventing howl sound/feedback
Two Mute Switches enable easy instrument swapping
and quieter plugging/unplugging when Live. Mutes can
also be used to switch off a feedback loop instantly
ROTARY POT CONTROLS -LOCATED ON TOP
6.0 GAIN CONTROLS (- CHANNEL 1 & 2) (0dB-32dB
Gain) Graduated 0-10
Turn Rotary Pot CW to increase the gain. Each dot
marker equals 2.5dB (approx.) or +/- 40%
Control on maximum "10" provides gain of 32dB ( x 5
approx. ) which is far more than should normally be
required
Start at around "2-3" or 1/4- 1/3 of the way to the right
and adjust to taste, listening to the level/desired volume.
P.26
To Next Page
Loading...