Operation manual
The unit stops working when the button or the pedal switch is loosened.
After operation, push the “POWER” button to turn off the power
.
Remove all accessories, abandon the disposable accessories following the
instruction, and take the treatment of cleaning and disinfecting for other
accessories.
Maintenance After Operation
Accessory Cleaning and Sterilization
● The accessories such as Hand Control Pencil, Foot Control Pencil and Hard Patient
plate, and the cords can be disinfect by 70% alcohol that is applied in hospital.
● Prior to using any accessories such as Hand Control Pencil, Foot Control Pencil and
Hard Patient plate and the cords, please disinfect them by ethylene oxide. After the
disinfection, please check them.
● The power cord, the pedal switch and cable should be maintained cleaning.
● Non-disposable accessories after the treatment of cleaning and disinfection should be
properly kept, so as to provide convenience in the next operation.
Note: When cleaning and disinfecting the accessories such as Hand Control Pencil,
Foot Control Pencil and Hard Patient plate, do not soak them in cleaning agent
or disinfectant.
Replace the Fuse Unit
● Switch the power off, disconnect the power cord from the machine, and the shut time
of the machine will last 10 minutes.
● Open the top cover of the fuse unit by a screwdriver.
● Select two fuse units of the same model and insert them into the socket.
● Reinstall the top cover of the fuse unit by a screwdriver.
Heal Force EB03
14
To Next Page
Loading...