Heath Zenith SL-6143 User Manual

Wireless Plug-In Chime
Accessory Receiver
Models SL-6143 and SL-6196
(Style may vary from illustration)
1. Plug in wireless chime.
To reduce the risk of electrical shock, this equipment has a polarized
plug (one blade is wider than the other). This plug will fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician to install
the proper outlet. Do not change the plug in any way.
© 2007 HeathCo LLC 595-5649-06
Chime Volume
Control
(Depending
upon model)
Access
Door
3. Set chime volume. Locate
control on back of plug-in
chime. (Volume control fea-
ture is available on selected
Heath
®
/Zenith chimes).
2. Test range. Press push
button to verify chime and
push button work properly. If
chime does not sound, see
Troubleshooting.

Heath Zenith SL-6143 Specifications

General

Detection Range	70 feet
Detection Angle	180 degrees
Color	White
Type	Motion Sensor
Power Source	Hardwired

Summary

Code and Tune Settings

Code Settings

Instructions for changing the wireless chime communication code using jumpers.

Tune Settings

Details on selecting and changing the chime melody from available tunes.

Troubleshooting

Technical Service

Contact information and procedures for obtaining technical assistance.

Regulatory Information

Compliance statement regarding FCC Rules and Industry Canada regulations.

Limited Warranty

Chime Purchase Information