25 / 40
PL
SK
DE
EN
CS
HU
• Stop and switch off the machine, when leaving the operation stand. Wait till all moving
parts stop and if it is necessary ensure the machine before moving.
• Do not use the device for trimming grass, which is not present on the ground, eg. grass,
which grows on the walls, rocks, etc.
• Before using, always visually inspect to see that the trimmer line, reel and cutterbar are not
worn or damaged. Replace worn or damaged parts.
WARNING! B
Always stop the engine when the problems blocked the cutting tool. Do not ever
remove the object that blocked cutting tool, if the engine is running.
WITH METAL CUTTING DISC
• Use only original cutting wheel supplied by the manufacturer.
• Disc is specially designed for cutting weeds, grasses and small shrubs. To prevent reverse
impact or rupture discs, do not use it to cut trees or larger shrubs.
CHECK THE DISC BEFORE USING
• Parts of the broken metal blade can fly away during operation. Check the metal disc on
the cracks before each use. Replace cracked disc immediately regardless of the size of
cracks. Cracked discs can be the result of misuse or improper grinding.
• Cracked or worn blades can cause accidents and serious injuries.
KICKBACK
• This phenomenon occurs when the disc hits Brush Cutter into a tree, stake, rock or other
hard objects at fast rotation and high speed. There will be a strong and rapid reverse
movement, called the kickback.
• Rebound can cause loss of control over the machine and is very dangerous.
• Especially if the front wheels right quadrant crash into bushes, clump of vegetation or similar
object, cukne wheel sharply to the right and back.
• To prevent reverse shock, cut from left to right. Pay attention to the cutting device to not
hit a solid object.
• During cutting, make sure that the blade was in contact with the chopped material in
the front third of the left.
WITH THE TRIMMER HEAD
• Use the correct cutting accessories.
• Use only original trimmer cutting head supplied by the manufacturer.
• Too long string of more than cutting cross-cut knife can leave when you turn on the machine
after setting the length of the strings.
REPEATEDLY STRESS INJURIES
• It is understood that the switching and muscle tension in the fingers, hands, arms and
shoulders can cause pain, swelling, weakness and extreme pain in these parts. Certain
repetitive hand activities you can expose the risk of repeated stress injury (RSI).
• To reduce the emergence of RSI, follow this:
- Do not expose your wrist twist, bend or stretched position.
To Next Page
Loading...