34 / 40
PL
SK
DE
EN
CS
HU
TRANSPORT
• Turn off the motor. Remove the battery. When transporting, be careful not to drop, or
otherwise shock the machine. For transport, the machine has to be fixed against slipping
and tipping over. Do not place objects on the machine.
TROUBLESHOOTING
CAUTION! A
You cannot rectify disorders that require more intervention yourself.
If you‘re unable to rectify the fault using the corrective measures described below,
contact a specialist garage, preferably an authorised service centre.
Improper handling can cause damage or serious injuries.
Problem Probable Cause Corrective Action
The engine does not start
Flat battery Check the battery status
On/Off switch defective
Repair in a professional repair
shop
Worn carbon brushes
Defective motor
The engine skips
Incorrectly installed battery Check the contact
Internal loose electrical connection
Repair in a professional repair
shop
On/Off switch defective
SERVICE
• Repairs to the power tools should be carried out by a qualified person using
identical replacement parts. In this way, the same level of safety of the power tool as
before repair will be ensured.
• Damaged battery packs must never be repaired. Battery packs should only be repaired
by the manufacturer or an authorised service centre.
• We recommend that repairs are exclusively entrusted to an authorised service
centre.
• For technical assistance, repair or to order original spare parts, we recommend that
you always contact the nearest HECHT authorised service centre.
• Information on service locations can be found at www.hecht.cz or on the customer
support line.
SPARE PARTS
• When ordering spare parts, please quote the part number, this can be found at
www.hecht.cz
To Next Page
Loading...