29 / 56
PL
SK
DE
EN
CS
HU
The use not corresponding to the intended purpose results in warranty termination and
the rejection of any responsibility on the part of the manufacturer.
Unauthorized changes exclude the liability of the manufacturer for damages resulting from this.
Do not overload! Use the product only for the powers it was designed for. The product
designed for a given purpose performs it better and safer than one that has a similar function.
Therefore, always use the correct one for a given purpose.
Please keep in mind that our products are not designed for commercial, trade or industrial use
according to their intended purpose. We accept no liability if the product is used in these or
comparable conditions.
C Where it is required, follow the legal guidelines and regulations to prevent possible
accidents during operation.
C The user is liable for all damages caused to third parties or their property.
CAUTION! A Never use the product if it is close to people, especially children or
pets.
• Keep these instruction manual and use them whenever you need more information. If you
dont understand some of these instructions, contact your dealer. If the product is lent to
another person, it is necessary to lent this instruction manual with it.
TRAINING
C All operating personnel must be adequately trained in the use, operation and
setting and especially familiar with prohibited activities.
• Never allow use by children or people unfamiliar with these instructions. Local regulations
may specify an age limit of the operator.
• This product is not intended for use by persons with reduced sensory or mental capacity
or lack of experience and konwledge - unless they are under the supervision of the person
responsible for their safety or if this person has instructed how use this product. The product
is not intended for use by children and persons with reduced mobility or poor physical
disposition. We strongly recommend to pregnant women to contact her doctor before use
of this product.
• Respect national/local regulations regarding working time (please, contact your local
authority).
WORKSPACE
• Keep work area clean and well lit. Cluttered and dark areas invite accidents.
• Do not operate this machine in explosive atmospheres, such as in the presence of flammable
liquids, gases, or dust. Machine create sparks which may ignite the dust or fume
• Don’t use on excessively steep slopes to avoid the risk of tipping the machine.
• When using the machine it is necessary to respect all rules and regulations regarding noise
and environmental protection. To avoid bothering others with the noise, you have to carefully
choose the times in which you use the cutter and consider the environmental conditions.
• Never use the machine on a slippery surface.
To Next Page
Loading...
