42 / 56
PL
SK
DE
EN
CS
HU
TIRE PRESSURE
• Regularly check tire pressure keep it at the specified values (see Specifications).
REPLACING AND REPAIRING THE TIRES
• All puncture repairs or replacements will have to be carried out by a tire repair expert in
accordance with the methods for the kind of tire used.
• Use only specified tire sizes (see Specifications).
CLEANING
CAUTION! A Do not hose engine. Water can damage engine or contaminate
the fuel system.
1. Allow engine to cool before cleaning to prevent your burning when handling with it.
2. After use, clean the outside of the machine.
3. Wipe the surface of the machine and engine cover with dry cloth. Clean the cover of
the machine, especially the ventilation holes.
4. Do not let the handles contaminate with oil or grease. Clean the handle clean with a damp
cloth washed in soapy water.
5. Do not use solvents or petrol! This can cause irreparable damage to the product. The plastic
parts can be eaten away by chemicals.
6. If any of the parts of the machine is cleaned by water or a damp cloth, etc., it must be
completely dry. Then the metal parts must be grease agains the corrosion with suitable
protective oil. Make sure that the water doesn´t leak into the internal parts of the machine.
7. We do not recommend washing the machines with pressure washer.
8. Scratched or worn varnished metal surfaces should be repaired with anticorrosive paint.
9. Potential damage of the parts due to corrosion, can not be assessed as a manufacturing or
material defect.
C In any case, do not wash by water the parts of machine, which are not intended
for it.
C Never use aggressive detergents or solvents for cleaning.
ENGINE MAINTENANCE
OIL CHANGE
It is recommended to ask authorized service for oil change.
Note: I
The first oil change should be carried out after 5 operating hours, when operating
under heavy load another change should be done after 25 operating hours.
Drain the engine oil when the engine is warm. Warm oil drains quickly and complete.
Attention: Do not drain oil when the engine is running!
When you drain the oil from the top oil fill tube, the fuel tank must be empty or fuel can leak
out and result in a fire or explosion.
1. Shut off the engine before performing any service on the machine. Wait till all moving parts
are completely stopped and disconnect the spark plug.
2. Place a suitable container next to the engine to catch the used oil.
To Next Page
Loading...
