EasyManua.ls Logo

hecht 2650 - Troubleshooting; Transporting

hecht 2650
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
47 / 56
PL
SK
DE
EN
CS
HU
TRANSPORTING
WARNING! B Do not carry or transport the machine while the engine is running.
Let the engine to cool down before transporting the machine. The fuel tank must be
empty. Spilled fuel or fuel vapor may ignite.
1. Empty the petrol tank with a suction pump. Start the engine and let it run until it has used
up all remaining petrol and stalls.
2. Close the fuel cap firmly.
3. Turn the engine switch and fuel valve (if equipped) to the off or stop position.
4. Let the engine to cool down before transporting.
5. Take care not to drop or strike the machine when transporting.
6. Tie down the machine securely in an upright position while transporting.
7. Take care not to strike the machine when transporting. Do not place objects on the machine.
TROUBLESHOOTING
CAUTION! A Failures of your machine which require larger interference must
always be eliminated by specialized workshop. Unauthorized interferences can
cause damages. If you can not rectify the fault using the measures described here,
contact an authorized service.
FAULT CAUSE ELIMINATION
Engine does not
start
Empty tank
Fill the tank up to its full capacity; check whether
the carburettor contains a fuel; check tank de-aeration
Dirty air filter Clean the air filter
Weak ignition spark
Clean the spark plug or install the new one if necessary;
check the ignition cable; let the ignition checked in
a service.
„Over-swilled“ engine
Unscrew the spark plug, clean it and dry; pull several
times the starting string when the spark plug is unscrewed
(without a choke).
Stale fuel tank
Drain fuel and clean carburettor. Fill tank with clean, fresh
fuel
Engine outages
occur
Ignition cable is released Fit the spark plug connector firmly onto the spark plug
Fuel piping is clogged or
fuel is bad
Clean fuel piping, use fresh fuel
Air hole in the fuel tank
cap is blocked
Clean or replace the fuel tank cap
There is water or dirt in
fuel piping
Drain the fuel and refill clean and fresh fuel
Air filter is dirty Clean the air filter

Related product manuals