22 / 48
PL
SK
DE
EN
CS
HU
• The machine must not be lifted or transported while the engine is running. When changing
the working area, switch off the machine and wait for the work tool to stop completely.
• Never use the machine with damaged protection devices or covers or missing, modified or
disconnected safety systems.
• Do not work with a damaged, incomplete or rebuilt machine.
• If you hit a foreign object, stop the machine. Allow the engine to cool down, disconnect
the spark plug terminal and check for any damage to the machine. The machine must be
repaired before starting and using it again.
• If abnormal vibrations occur or you hear unusual sound during operation, stop the machine
and determine the cause. Vibrations generally indicate a malfunction. Have it repaired
before using it again.
• If you use the machine for the first time or after a repair, it is necessary to perform a test
run to see if any abnormal reactions occur. This avoids the risk of injury or damage to
the machine.
PREPARATION
• Keep all guards and deflectors in place and in good working condition.
• Check the machine before an each use to determine whether the working tools are not
worn or damaged. Replace worn or damaged parts.
• Do not work with damaged, incomplete device, or device adjusted without the consent of
the manufacturer. Never use the device with defective protective equipment. Before use,
check device condition, particularly power connections, switches and protective covers.
WORK AREA
• Do not operate in explosive atmospheres, such as in the presence of flammable liquids,
gases, or dust. Product create sparks which may ignite the dust or fume.
• Check the terrain where you are going to use the machine, and remove any objects that
could be caught, tangled, or discarded (stones, shards of glass, nails, wires, toys, sticks,
etc.). Only operate the machine on a safe surface and only in good light!
• Never use the machine during rain and storms, especially if there is a risk of lightning strikes.
• Never use the machine on a slippery surface.
• While working, make sure that you stand firmly. Be particularly careful when working on
sloping terrain.
USING PETROL MACHINES
• When working with a petrol machine never use brute force. The machine, which was
designed for the job, performs it better and safer, therefore always use the correct machine
for a given task.
• The performance of a petrol engine mounted on a particular device, may not achieve gross
output. It is caused by many factors, e.g. the used components (exhaust, charging, cooling,
carburettor, air filter, etc.), usage restrictions, operational conditions of use (temperature,
humidity, etc.) and the differences between individual engines produced.
To Next Page
Loading...
