38
1.3 Working with the programming station
Exiting the programming station completely
Select the Manual Operation mode
Shift the soft-key row until the soft key for shutting down the
system appears
Select the function for shutting down and confirm the
following dialog prompt with the YES soft key
Exiting the programming station temporarily
Press the Windows key on the ASCII keyboard for the screen to
display the last active application and the taskbar
Double-click the green HEIDENHAIN symbol to the lower right in
the taskbar for the TNC Control Panel to appear (see figure at right)
Select the function for stopping the TNC application:
Press the Stop button. The TNC Control Panel
remains active. To restart the programming station
software, press the Restart button
To Next Page
Loading...
