42
1.5 Special features of the demo version
Keyboard assignment
The assignment of the TNC's special keys (axis keys and dialog keys)
and the TNC number pad are shown in the figure at upper right. The
assignment of the screen keys is shown in the Function of the
screen keys table below. All other TNC functions are called with
shortcut commands, which are listed in the TNC functions table on
the next page.
Keys on the TNC screen
Functions for vertical soft keys are available only if you use
a special PLC program for the programming station.
Function of the screen keys TNC key PC key
Shift soft-key row left
Shift soft-key row right
Select split screen layout
Toggle the display between
machining and programming modes
Horizontal soft key 1
Horizontal soft key 2
Horizontal soft key 3
Horizontal soft key 4
Horizontal soft key 5
Horizontal soft key 6
Horizontal soft key 7
Horizontal soft key 8
To Next Page
Loading...
