58
2.2 Connecting the programming station
Setting the conversational language
When installing the programming station software, you can select
either English or German as the conversational language. Follow the
procedure below to switch to another conversational language:
Start the programming station software
Select the Programming and Editing mode of
operation
Select MOD functions
Enter the code number 123 and confirm with the ENT
key
To select machine parameter CfgDisplayLanguage:
Press the GOTO key, enter CfgDisplayLanguage, and
confirm with the ENT key
Set the desired conversational language (see the table
below), and confirm with the END key
Conversational language Value from
English ENGLISH
German GERMAN
Czech CZECH
French FRENCH
Italian ITALIAN
Spanish SPANISH
Portuguese PORTUGUESE
Swedish SWEDISH
Danish DANISH
Finnish FINNISH
Dutch DUTCH
Polish POLISH
Hungarian HUNGARIAN
Russian RUSSIAN
Chinese (simplified) CHINESE
Chinese (traditional) CHINESE_TRAD
Slovenian SLOVENIAN
Norwegian NORWEGIAN
To Next Page
Loading...
