HEIDENHAIN Programming Station TNC 320/TNC 620/TNC 640 57
2.2 Connecting the programming station
You can make other changes to the server settings with the "Server
Administration" program. Start the AdminApp.exe program (directory:
CBServer) for this:
Press the "Search" button to show all PCs to which a dongle is
connected
Click an IP address to add it to the address block for connection
settings
Use the IP address 127.0.0.1 (default setting) to load the data from
the local dongle server
Press the "Connect" button to open a window with information
about the dongle and other possible settings (e.g. "Connection
timeout")
You will find more information on the Server Administration program
in the readme.txt file (directory: CBServer).
To Next Page
Loading...
