Translation of the original instructions / Small animal clipper 17
Charging station
1
1. Disconnect the charging station from
the power supply.
2. If necessary, take away hairs from
both charging cavities.
3. Wipe the contacts (1) clean with a
dry cloth.
Fig. 25
Contacts
Clean the contacts of the battery and the shearer with a dry cloth as ne-
cessary.
6.2.6 Battery clip
2
1
Fig. 26
The battery clip is for storage of the se-
condbattery.Thebatteryclip(1)clicks
into the charging station (2). Use of the
battery clip is optional.
Fig. 27
1. Insert the battery as shown (Fig. 27),
with the contacts facing downwards.
Either insertion orientation can be
used.
NOTE!
Ifnotusingdaily,storeshearerandchargingstationinthepackagingsup-
plied with them. When in use daily, we recommend to put clipper or reserve
battery in the charging station.