Helmer iPR456 - General Recommendations

Helmer Scientic i.Series
®
and Horizon Series
™
Pass-Thru Refrigerator Operation Manual
360378/C 5
Avoiding Injury
Review safety instructions before installing, using, or maintaining the equipment.
♦ Before moving unit, ensure doors are closed and casters are unlocked and free of debris.
♦ Before moving unit, disconnect the AC power cord and secure the cord.
♦ Do not open multiple, loaded drawers at the same time.
♦ Do not move a unit whose load exceeds 900 lbs / 408 kg (single-door units) or 1350 lbs / 612 kg (double-door units).
♦ Never physically restrict any moving component.
♦ Avoid removing electrical service panels and access panels unless so instructed.
♦ Keep hands away from pinch points when closing the door.
♦ Avoid sharp edges when working inside the electrical compartment and refrigeration compartment.
♦ Ensure biological materials are stored at recommended temperatures determined by standards, literature, or good
laboratory practices.
♦ Proceed with caution when adding and removing samples from the refrigerator.
♦ Use manufacturer supplied power cord only.
♦ UsingtheequipmentinamannernotspeciedbyHelmerScienticmayimpairtheprotectionprovidedbytheequipment.
♦ Decontaminatepartspriortosendingforserviceorrepair.ContactHelmerScienticoryourdistributorfor
decontamination instructions and a Return Authorization Number.
♦ Ensure biological materials are stored safely, in accordance with all applicable organizational, regulatory, and legal requirements.
♦ Therefrigeratorisnotconsideredtobeastoragecabinetforammableorhazardousmaterials.
CAUTION
Decontaminate parts prior to sending for service or repair. Contact Helmer or your distributor for decontamination
instructions and a Return Authorization Number.
1.2 General Recommendations
Intended Use
Helmerrefrigeratorsareintendedforthestorageofbloodproductsandothermedicalandscienticproducts.
General Use
Allow refrigerator to come to room temperature before powering on.
During initial startup, high temperature alarm may activate while refrigerator reaches operating temperature.
Initial Loading
Allow chamber temperature to stabilize at the setpoint before storing product.
Product Loading Guidelines
When loading your refrigerator, take care to observe the following guidelines:
♦ Never load refrigerators beyond capacity.
♦ Always store items within shelves, drawers or baskets.
♦ Temperatureuniformityismaintainedbyaircirculation,whichcouldbeimpededifunitisoverlled,particularlyatthetopor
against the doors or walls. Ensure proper clearance is provided below the fan.
Note
Productsstackedagainstwallsordoorsmayobstructairowanda󰀨ectperformanceofunit.