Hemisphere GPS MBX-4 - Page 55

46
3: MBX-4 Configuration and Operation
Use the and keys to select the desired units, and press again
to implement the change.
Hgt Unit
{Meters, Feet}
Pressing with this line in focus allows you set the units of the Hgt
parameter displayed in the Position Status section of the menu, in BX-E
mode. Use the
and keys to select the desired units, and press
again to implement the change.
Vel Unit
{KPH, MPH, k}
Pressing with this line in focus allows you set the units of the Vel
parameter displayed in the Position Status section of the menu, in BX-E
mode. Use the
and keys to select the desired units (kilometers/
hour, miles/hour, or knots), and press again to implement the
change.
UTC Offset
{-12 to +12 hours}
Pressing with this line in focus allows you set the local time offset
from UTC allowing the display of local time, in the Position Status
section of the menu, in BX-E mode. Use the
and keys to select
the desired offset in hours, and press again to implement the
change.
Back
Returns the MBX-4 to the Setup menu level.