MBX-4 User Guide
47
The Setup menu also provides the following configuration and
information options.
Auto Bx Search
Pressing with this line in focus sets the MBX-4 to ABS mode, erasing
the stored Global Search Table and forcing a new Global Search.
Tune 325.0/200
Pressing with this line in focus allows you set the beacon frequency
and MSK rate to which the receiver should tune. The and keys
increment the frequency by 500 Hz, with three MSK rate options, 100
bps, 200 bps, and Auto, available for each increment. Select Auto if you
know the frequency of the beacon but are uncertain of the correct MSK
rate. When the correct frequency and bit rate is displayed, press
to
proceed to the Beacon Status menu.
Select Beacon
This feature allows you to select a particular beacon for a geographical
region. Geographic regions are resolved into continent and country.
Upon selecting a beacon, the MBX-4 will automatically return to the
Beacon Status menu, updating the Stn/B and beacon name fields.
Subscription
The subscription feature allows you to configure the MBX-4 for
operation within a Hemisphere GPS proprietary encrypted RTCM
broadcast network. To enable this feature, please contact your
Hemisphere GPS dealer or Hemisphere GPS Customer Service.
Version Display
Displays the MBX-4 serial number, resident firmware, SBX-4-2
firmware, and receiver diagnostic checksums.
To Next Page
