User Manual – 17/32
- The configuration is set to 44100Hz (44.1kHz)/16-bit mode by default.
- Switching to 24-bit mode only lets you use inputs 1-2 (inputs 3-4 are not available).
Advanced tab:
- This tab allows you to set the hardware mix options for output 1-2: USB streaming 1-2 (default),
USB streaming 1-2 plus your microphone, or USB streaming 1-2 plus line in 1-2.
- You can also set the MIDI channel (2 by default), in the event that there is some conflict
between your DJ Console Rmx and another MIDI device. If you have more than one Hercules
device installed on your system, the MIDI channel numbers are assigned by order of connection,
i.e. incrementally.
To Next Page
Loading...
