30
Ÿ Check the side stand for proper function
and the spring (3) for damage or loss of
tension and the side stand assembly for free
movement.
Ÿ Check whether the side stand indicator (1)
glows when the side stand is down.
Ÿ While the vehicle is removed from side
stand, the side stand indicator (1) should
not glow.
Ÿ If the side stand indicator (1) does not
operate as described in above steps, please
visit your Authorised Hero MotoCorp
workshop.
Ensure that adequate care should be taken
while cleaning the side stand switch.
CAUTION
!!
Your vehicle is equipped with “Side
stand engine kill” feature for safety
purpose.
This feature has following functions:
•
It prevents starting the engine when
transmission is in gear (irrespective of
clutch lever operation) and side stand is
down.
•
It stops the running engine when
transmission is in gear (irrespective of
clutch lever operation) and side stand is
moved down.
WARNING
!!
“Side stand engine kill” system is not affected
by clutch lever operation.
To inspect the functionality of this feature,
park the vehicle on its main stand and check
all the conditions described in the inspection
flow diagram:
INSPECTION FLOW DIAGRAM
2. Then shift the transmission to gear (with
engine running and irrespective of clutch
lever operation).
Does engine stop?
Visit Authorised
Hero MotoCorp
Workshop
NO
3. Now press the electric starter switch (After
engine has stopped).
NO
SYSTEM IS OK
Does engine start?
YES
Visit Authorised
Hero MotoCorp
Workshop
NO
YES
Does engine start?
Visit Authorised
Hero MotoCorp
Workshop
YES
1. Turn the ignition switch to “ON” ( )
position and press the electric starter
switch (with transmission in neutral and
side stand is down).
To Next Page
Loading...
